KASTWAVE FEP Film, High Transmittance Strength Film with Replacement Plastic Spatulas, Thickness 0.15 mm Compatible with UV DLP 3D Printers, LCD SLA Resin (140 x 200 mm)

FEP Film, High Transmittance Strength Film with Replacement Plastic Spatulas, Thickness 0.15 mm Compatible with UV DLP 3D Printers, LCD SLA Resin (140 x 200 mm)

★★★Why choose us?★★★
✅ - High transmittance, more than 95% light transmittance
✅ - High ductility,300% ductility
✅ - Good flexibility, 10000 times bending test
✅ - High temperature resistance, 200 degrees Celsius long-term resistance
✅ - Stable release force, uniform coating
✅ - High cleanliness, dust-free workshop production
✅ - Flat surface, no wrinkles, scratches and bubbles

★★★Easy to install★★★
1️⃣ - Remove the screws to detach the steel rings from the resin vat.
2️⃣ - Remove the else screws to separate the steel ring and change the film.
3️⃣ - Put the replaceable FEP film in between the steel rings and install the screws back, you may need to force these screws in and keep them tightly.
4️⃣ - Install the steel rings back to the resin vat and ensure the FEP film is clean and tensioned properly.

★★★Specifications★★★
Material: FEP film
Color: as picture shows
Size: 140 x 200 mm
Thickness: approx. 0.15 mm-0.2 mm

★★★What you will get★★★
5 * FEP film
1 * Plastic spatulas

★★★Note★★★
- Please allow a little error on the size due to manual measurement.
- All the brands we mentioned just show products adaptability, not worked as trade mark use, kindly noted.